TCT Circular Saw Blade

TCT saw blade, the material body is 50# and OKE017 tip, carbide Tip: YG8, YGB, Teeth type is ATB teeth, Flat teeth, TCG. Application is cutting all kinds of soft, hard wood, non- Iaminated panels and plywood. Teeth number is 24T, 30T, 36T, 40T, 80T, 100T, 120T.

TCT saw blade 230mm x60T for wood
Promotion Restriction:	Not eligible for promotion for promotion
Arbor Hole size:	1inch
Abrasive Wheel Diameter:	9", 230mm
Series:	Wood
Ideally Used With:	Circular saw
Item:	230mmx 60T, 9"x40T
Packing:	10pcs each white inner box, 40pcs each colorful carton
Mini order:	1 carton each style, OME is 1000pcs each size each teeth

For sawing wood, particle board, and medium-density boards, left and right teeth should be selected, which can cut the wood fiber structure sharply and make the incision smooth; in order to keep the groove bottom flat and grooved, use flat teeth or use left and right flat combined teeth; sawing Ladder flat teeth are generally used for veneer and fireproof boards. Because of the large cutting rate of computer cutting saws, the alloy saw blades used are relatively large in diameter and thickness. The diameter is about 350-450mm, and the thickness is between 4.0-4.8mm. Most Use ladder flat teeth to reduce chipping and saw marks. The rake/clearance angle is 15 degrees.

Welding method

A: High-frequency welding (manual, semi-automatic and fully automatic) Skin effect and adjacent effect produced by high-frequency current; this welding is characterized by high efficiency, fast speed, good repeatability, fast and uniform heating, and effective prevention of saw blades Embrittlement and fracture caused by local overheating can also prevent tooth loss caused by unwelded.

B: Alloy welding: Alloy welding is biased towards low-temperature welding to protect the base and alloy from damage during welding. The welding temperature is not higher than 75 degrees Celsius.

Resistance welding is generally used in the market, which is not as stable and firm as high-temperature welding, and the appearance after welding is different. The appearance of high-frequency welding is more beautiful, the welding temperature is more stable, and the quality of the alloy bit is not easily affected.

FAQ 
1. Are you manufacturer or trading company ? 
 We are manufacturer in Yongkang city ,Zhejiang ,China. 
2. Do you accept OEM for custromers brand ? 
 Yes,but MOQ will be required . if you want to take our brand,less qty with mix sizes are accepted. 
 3. Do you have inspection procedure before shoppinh  
 Yes,we do 100%QC inspetion before shipment. 
4. What certificates do your products have ? 
 China ISO9001,Gemany MPA and European EN12413 for cutting disc . 
5. Do you have stock? 
 Yes,we have the stock with our SALI brand . 
6. What is the delivery time ? 
 20days for 1 container order . 
7. What is your prot of the shipment ? 
 Ningbo or Shanghai .