TCT saw blade, the material body is 50# and OKE017 tip,carbide Tip: YG8, YGB, Teeth type is ATB teeth, Flat teeth, TCG. Application is cutting all kinds of soft, hard wood, non- Iaminated panels and plywood. Teeth number is 24T, 30T, 36T, 40T, 80T, 100T, 120T.

TCT saw blade 180mmx40T for wood
Promotion Restriction:	Not eligible for promotion for promotion
Arbor Hole size:	1inch
Abrasive Wheel Diameter:	7", 180mm
Series:	Wood
Ideally Used With:	Circular saw
Item:	180mmx40T, 7"x40T
Packing:	10pcs each white inner box, 50pcs each colorful carton
Mini order:	1 carton each style, OME is 1000pcs each size each teeth

Selection of the number of teeth 180*40t

The number of teeth of the saw tooth, generally speaking, the more the number of teeth, the more cutting edges can be cut in a unit time, the better the cutting performance, but the more cutting teeth need to use more cemented carbide, the price of the saw blade is higher, but the teeth are too dense, The chip capacity between the teeth becomes smaller, which is easy to cause the saw blade to heat up; in addition, if there are too many teeth, when the feed amount is not properly matched, the cutting amount of each tooth is small, which will aggravate the friction between the cutting edge and the workpiece and affect the service life of the cutting edge . Usually the tooth spacing is 15-25mm, and a reasonable number of teeth should be selected according to the material to be sawed.

Alloy saw blades above 250mm. The number of teeth above 100T is for cutting aluminum, the other teeth are for cutting wood, and the smaller number of teeth is good for heat dissipation.

Choice of thickness

The thickness of the saw blade theoretically we hope that the thinner the saw blade is, the better, the sawing is actually a consumption. The material of the alloy saw blade base and the process of manufacturing the saw blade determine the thickness of the saw blade. If the thickness is too thin, the saw blade is easy to shake when working, which affects the cutting effect. When choosing the thickness of the saw blade, the stability of the saw blade and the material to be cut should be considered. Some special-purpose materials require specific thickness and should be used according to equipment requirements, such as slotting saw blades, scoring saw blades, etc.