Wheel Diam Metal Inox Grinding Wheel

Here is 7 inch grinding wheel, the grinding wheel is made of high quality aluminum oxide grains. It is specially used for grinding metal, It has an advantage of durability and efficient.

180x3x22.2mm grinding wheel, we sell more to Middle east and South America market.

Question: Why Static balance value is too large?

Reason: Uneven distribution causes

Impact on the grinding wheel: When the static balance value is too large, the machine will shake without load, and it may also swing from side to side.

Question: Why the center of the slice falls off and the film bursts?

Answer: The flange plate is not tight, or the core ring card is deformed and shakes during the cutting process, and squeezes or collides with the workpiece, and finally the center falls off and the product is broken.

It is generally a problem for the operator.

Question: Why slice burst?

Answer: During the cutting process, when the knife is stuck or blocked, the handle of the cutting machine is not lifted in time, and the product is pressed down for efficiency, resulting in distortion of the product and bursting of the film.

Generally it is an operational problem.

Question: Why can not move?

Answer:

1. The cutting machine has low speed and low power.

2. The material of the cutting workpiece is too hard and the cross-sectional area is large.

3. Abnormal grinding wheel (abrasive error, incomplete hardening, swing, etc.)