Marble machine is also a stone cutting machine, which can be used to cut stone and ceramic tiles. For machines with wood and other materials, of course, different materials should choose suitable cutting blades. The maximum product can use a 110mm saw blade, the voltage is 220v, the frequency is generally 50Hz, and the input power is 1200W. Before using the marble machine, be sure to wear protective clothing and goggles. Ladies need to curl their hair and put on a work cap, check the power switch, the tightness of the saw blade, the saw blade passport or the safety baffle for detailed inspection , The console must be stable, and sufficient lighting is required for night work. Need to run idling for a few laps after power-on, and restart after confirming safety Pay attention when working 1. It is strictly forbidden to operate with gloves. If dust is caused during operation, wear a mask or face shield. 2. Don't try to cut small unclamped workpieces. 4. This cutting machine only allows cutting profiles. 5. Do not perform strong cutting operations, and make the motor reach full speed before cutting. 6. No one is allowed to stand behind the saw. 7. Do not lean over or bypass the sawing machine, and do not loose any hand or raise the arm from the saw or workpiece when the saw blade is not stopped. 8. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade. 9. Before repairing or replacing parts, you must cut off the power supply and wait for the saw blade to stop completely. 10. If abnormal sound is found, the inspection should be stopped immediately.
