When the compressor is working, the air is sucked through the self-cleaning air filter, and the filter is automatically cleaned by PLC. The air enters the first stage of compression after automatic adjustment of the inlet guide vane. The gas temperature after the first stage of compression is higher, and then enters the intermediate cooler for cooling (water goes inside the pipe, gas goes outside the pipe, Knowing the water flow in the device for 110 m/h) after entering the secondary compression system, in order to avoid the system gas into the compression chamber (avoid starting) under pressure in the compressor exhaust pipe installation there is a suspension of the check valve, compressor exhaust gas pushed open the check valve into the exhaust muffler, and then enter the primary cooler, cooler after secondary, again into the exhaust pipe main.
