Subei Grinding Wheels, Vitrified Bonded, Bondflex Abrasives

Our company believes that it is precisely because we have these excellent Zirconia Oxide Flap Discs 60 40 Grit, SALI 7 Inch 60 Grit SGP Inox Wheel, 9 Inch Angle Grinder and services that customers will choose us from the beginning. Therefore, we can meet different inquiries from different clients. We hope to build a world-class enterprise with global competitiveness along the road of high-quality development. We wish to work with you and seek common development.

Here is 9 inch cutting wheel for stainless steel, inox,  the cutting disc is made of high quality single aluminum oxide grains. It is especially used for cutting stainless steel. Due to the supper think, it has fast cutting while have excellent durability feature.

Question: The flange of the product center falls off?

Answer:

1. The product becomes soft during cutting, which leads to swinging during cutting. After a long time, cracks occur on the circumference outside the flange and finally break away from the grinding wheel itself;

2. The workpiece is not effectively fastened, and the workpiece is moved left or right during cutting, and the grinding wheel for vertical cutting becomes curved and cut. After a long time, the result is the same as above;

3. The flange does not effectively fasten the grinding wheel. When rotating at high speed, the grinding wheel and the flange do not run synchronously, which causes the flange to rub the grinding wheel. After a long time, the result is the same as above.

4.The grinding wheel is not clamped.

5. The product aperture does not match the device shaft aperture.

Question: Why the edge is chipping?

Answer:

1. The contact with the workpiece is too fast and a hard collision occurs.

2. The grinding angle is too small.

3. The product is hard.

[[ContDescription]]