To promote the development of the company, our primary task is to ensure the quality of our Key Type Drill Chuck, Stone Hammer, Folding Utility Knife so as to gain the trust of our customers. Our company core value includes that employee is our foundation, customer first, teamwork, results oriented and self-transcendence. It is an important part of our sustainable development plan to fulfill the responsibility of environmental protection and promote the harmonious development of man and nature. Under the guidance of the business philosophy of 'differentiated operation, refined operation and international thinking', our company will continue to move towards higher goals.

Here is 9 inch cutting wheel for stainless steel, inox, the cutting disc is made of high quality single aluminum oxide grains. It is especially used for cutting stainless steel. Due to the supper think, it has fast cutting while have excellent durability feature.

SALI 230x2x22.2mm cutting wheel Specification
Promotion Restriction:	Not eligible for promotion for promotion
Arbor Hole size:	7/8" 22.2mm
Abrasive Wheel Diameter:	9", 230mm
Series:	Stainless steel
Ideally Used With:	7inch Angle grinder
Item:	Cut-off wheel 7"x3/64"x7/8", PK25
Packing:	25pcs each plastic bag; 50pcs each color inner box; 100pcs each colorful carton
Mini order:	1 carton each style

Question: The flange of the product center falls off?

Answer:

1. The product becomes soft during cutting, which leads to swinging during cutting. After a long time, cracks occur on the circumference outside the flange and finally break away from the grinding wheel itself;

2. The workpiece is not effectively fastened, and the workpiece is moved left or right during cutting, and the grinding wheel for vertical cutting becomes curved and cut. After a long time, the result is the same as above;

3. The flange does not effectively fasten the grinding wheel. When rotating at high speed, the grinding wheel and the flange do not run synchronously, which causes the flange to rub the grinding wheel. After a long time, the result is the same as above.

4.The grinding wheel is not clamped.

5. The product aperture does not match the device shaft aperture.

Question: Why the edge is chipping?

Answer:

1. The contact with the workpiece is too fast and a hard collision occurs.

2. The grinding angle is too small.

3. The product is hard.