Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for PFE Technologies Grinder, Rubber Hammer, 14 Inch Green Super Thin Cutting Abrsive Discs. Our company has high-quality R&D personnel and production technicians, as well as a number of key technologies in the industry. With the continuous expansion of scale and increasing market complexity, effective product performance control is the key to improving product quality and economic benefits. We meet the requirements of our customers with different degrees of specialization to the greatest extent.

Here is 9 inch cutting wheel for stainless steel, inox, the cutting disc is made of high quality single aluminum oxide grains. It is especially used for cutting stainless steel. Due to the supper think, it has fast cutting while have excellent durability feature.

SALI 230x2x22.2mm cutting wheel Specification
Promotion Restriction:	Not eligible for promotion for promotion
Arbor Hole size:	7/8" 22.2mm
Abrasive Wheel Diameter:	9", 230mm
Series:	Stainless steel
Ideally Used With:	7inch Angle grinder
Item:	Cut-off wheel 7"x3/64"x7/8", PK25
Packing:	25pcs each plastic bag; 50pcs each color inner box; 100pcs each colorful carton
Mini order:	1 carton each style

Question: The flange of the product center falls off?

Answer:

1. The product becomes soft during cutting, which leads to swinging during cutting. After a long time, cracks occur on the circumference outside the flange and finally break away from the grinding wheel itself;

2. The workpiece is not effectively fastened, and the workpiece is moved left or right during cutting, and the grinding wheel for vertical cutting becomes curved and cut. After a long time, the result is the same as above;

3. The flange does not effectively fasten the grinding wheel. When rotating at high speed, the grinding wheel and the flange do not run synchronously, which causes the flange to rub the grinding wheel. After a long time, the result is the same as above.

4.The grinding wheel is not clamped.

5. The product aperture does not match the device shaft aperture.

Question: Why the edge is chipping?

Answer:

1. The contact with the workpiece is too fast and a hard collision occurs.

2. The grinding angle is too small.

3. The product is hard.