Factory OEM 350mm, 355mm, 400mm Big Size Cutting Disc Cut-off Wheel for Metal Polishing

Our company's Cutting Disc For Metal, SG Inox Grinder Abrasives, Twisted Wire Cup Brush have gone through regular and irregular inspection, products are up to or exceed national standards or industry standards. Since the establishment of our company, we have continued to expand our product design and global expertise. If you are interested in any of our products, please do not hesitate to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. Our scientific procurement combined with our own technology and equipment can reduce customer costs very well, and serve every new and old customer with the best product quality and reasonable product quotation.

Here is 14 inch cutting wheel for metal, it is made of high quality aluminum oxide grains, used for cutting angle bar, T bar, flat bar, pipe etc. Due to super thin, it has fast cutting while have excellent durability feature.

The 14inch cutting wheel, green, black and red color with single net or 2 nets are hot-selling in India with the OME brand and own SALI brand.

Factors affecting the sharpness of the cutting blade:

1. The cross-sectional area of the workpiece to be cut is too large, and the grinding wheel encounters greater resistance during cutting and high temperature causes the expansion of the workpiece, which causes the rotation speed to drop, which cannot achieve the due impact;

2. Extremely high temperature is generated when the grinding wheel is cutting. In severe cases, the resin of the high-temperature carbonized grinding wheel or the card knife, etc.;

3. The speed of the cutting equipment is too low to achieve the due impact;

4. The hardness of the grinding wheel is too hard, and the self-sharpening of the grinding wheel is poor or the grinding wheel itself cannot be metabolized well;

5. The binding dose of the grinding wheel is too large, which causes the hardness of the grinding wheel to be harder. The problem is the same as above

6. The hardening of the grinding wheel is not good, and the resin in the grinding wheel does not fully exert its cohesiveness, causing the grinding wheel to not have good holding power

[[ContDescription]]