China Factory 350/355mm 14inch Big Size Abrasive Cutting Wheel for Angle Grinder

Our enterprise aims to operating faithfully, serving to all of our prospects, and working in new technology and new machine frequently for Hand Brush, 4.5 Inch Angle Grinder, Segment Diamond Saw Blade. As a pioneer in the development of market economy, we break the confinement of ideas, follow the laws of economy, and boldly innovate and practice. We take the technology as the forerunner and market for development, and strive for survival by quality as the basic concept.

Here is 14 inch cutting wheel for metal, it is made of high quality aluminum oxide grains, used for cutting angle bar, T bar, flat bar, pipe etc. Due to super thin, it has fast cutting while have excellent durability feature.

The 14inch cutting wheel, green, black and red color with single net or 2 nets are hot-selling in India with the OME brand and own SALI brand.

Factors affecting the sharpness of the cutting blade:

1. The cross-sectional area of the workpiece to be cut is too large, and the grinding wheel encounters greater resistance during cutting and high temperature causes the expansion of the workpiece, which causes the rotation speed to drop, which cannot achieve the due impact;

2. Extremely high temperature is generated when the grinding wheel is cutting. In severe cases, the resin of the high-temperature carbonized grinding wheel or the card knife, etc.;

3. The speed of the cutting equipment is too low to achieve the due impact;

4. The hardness of the grinding wheel is too hard, and the self-sharpening of the grinding wheel is poor or the grinding wheel itself cannot be metabolized well;

5. The binding dose of the grinding wheel is too large, which causes the hardness of the grinding wheel to be harder. The problem is the same as above

6. The hardening of the grinding wheel is not good, and the resin in the grinding wheel does not fully exert its cohesiveness, causing the grinding wheel to not have good holding power

[[ContDescription]]