Blue Ceramic Grain Abrasive for Quality Coated/Bonded Abrasives

Our organization successfully attained IS9001 Certification and European CE Certification of Angle Grinder, JIG Saw 110mm in 750W, 4.5 Inch Angle Grinder. Through resource deployment, we gather our organizational, resource and talent advantages into an inexhaustible impetus for the company to move forward. We will work hard to solve social problems centered on the sustainable development goals, and formulate a sustainable policy plan that continuously creates social and corporate value. Our company has been in line with the concept of 'details achieve quality, service comes from sincerity, ideas achieve brand'.

Here is 9 inch cutting wheel for stainless steel, inox,  the cutting disc is made of high quality single aluminum oxide grains. It is especially used for cutting stainless steel. Due to the supper think, it has fast cutting while have excellent durability feature.

Question: The flange of the product center falls off?

Answer:

1. The product becomes soft during cutting, which leads to swinging during cutting. After a long time, cracks occur on the circumference outside the flange and finally break away from the grinding wheel itself;

2. The workpiece is not effectively fastened, and the workpiece is moved left or right during cutting, and the grinding wheel for vertical cutting becomes curved and cut. After a long time, the result is the same as above;

3. The flange does not effectively fasten the grinding wheel. When rotating at high speed, the grinding wheel and the flange do not run synchronously, which causes the flange to rub the grinding wheel. After a long time, the result is the same as above.

4.The grinding wheel is not clamped.

5. The product aperture does not match the device shaft aperture.

Question: Why the edge is chipping?

Answer:

1. The contact with the workpiece is too fast and a hard collision occurs.

2. The grinding angle is too small.

3. The product is hard.

[[ContDescription]]