350mm 355mm 14inch Cutting and Grinding Wheel for Angle Grinder

Our goal is not only to provide a wide range of 4 In Performance Line SG Cut Off Wheel, Segment Diamond Saw Blade, 9 In SALI Grinding Wheel, but also to provide solid and effective technical support and services. We're making great efforts to achieve this win-win situation and sincerely welcome you to join us. Our company has always established the awareness of total quality management and made continuous improvement of product quality as the outline of our work. We will carry out the clear good brand strategy for a long time. In the next few years, this will be reflected in the large range of good products and market offensive.

Here is 14 inch cutting wheel for metal, it is made of high quality aluminum oxide grains, used for cutting angle bar, T bar, flat bar, pipe etc. Due to super thin, it has fast cutting while have excellent durability feature.

The 14inch cutting wheel, green, black and red color with single net or 2 nets are hot-selling in India with the OME brand and own SALI brand.

Factors affecting the sharpness of the cutting blade:

1. The cross-sectional area of the workpiece to be cut is too large, and the grinding wheel encounters greater resistance during cutting and high temperature causes the expansion of the workpiece, which causes the rotation speed to drop, which cannot achieve the due impact;

2. Extremely high temperature is generated when the grinding wheel is cutting. In severe cases, the resin of the high-temperature carbonized grinding wheel or the card knife, etc.;

3. The speed of the cutting equipment is too low to achieve the due impact;

4. The hardness of the grinding wheel is too hard, and the self-sharpening of the grinding wheel is poor or the grinding wheel itself cannot be metabolized well;

5. The binding dose of the grinding wheel is too large, which causes the hardness of the grinding wheel to be harder. The problem is the same as above

6. The hardening of the grinding wheel is not good, and the resin in the grinding wheel does not fully exert its cohesiveness, causing the grinding wheel to not have good holding power

[[ContDescription]]