14"Inch Cutting Wheel Cut Stainless Steel and Metal, Industrial Type, Sharp

After years of pioneering and enterprising, our company has built a modern production line of Pump Pliers, 30 Teech Saw Blade 1 In Hole, Diamond Grinding Plate. We always adhere to the concept of taking morality as the first, which is reflected in the professionalism, selection and employment. We always adhere to the planned, step-by-step, and reasonable development of business channels, and bind the interests of the majority of enterprises to build a comprehensive business platform. We insist on emancipating the mind, advancing with the times, and constantly promoting the renewal and development of the enterprise.

Here is 14 inch cutting wheel for metal, it is made of high quality aluminum oxide grains, used for cutting angle bar, T bar, flat bar, pipe etc. Due to super thin, it has fast cutting while have excellent durability feature.

The 14inch cutting wheel, we have thickness as 1.9mm, 2.5mm, 2.8mm, 3.0mm, 3.2mm. As this huge diameter we only can make the Flat shape, so we divide into many thickness for your choices.

Once the trademark is scratched, and the aperture is rubbed.

The reason is: After the grinding wheel was installed, it was unable to cut during the cutting process. After the flange was removed after the machine stopped, the core ring of the grinding wheel was dropped. In this case, the grinding wheel is not effectively tightened when the grinding wheel is installed. The grinding wheel encounters the resistance of the workpiece during high-speed cutting, resulting in the grinding wheel and the spindle not running synchronously. The spindle speed is fast and the grinding wheel is slow. At this time, the spindle will rub the core ring until it is worn out. Reflect the problem. As long as the core ring is dropped after the machine is installed and the aperture is rubbed, it is caused by the flange plate not being effectively tightened to the grinding wheel.

[[ContDescription]]